-
Trusted Heavy Duty Flat Bed Lathe with Swing over bed between 880- 1275mm and up to 12,000mm between centers
Item LC-35 LC-40 LC-45 LC-50 Swing Over Bed 880mm 1,010mm 1,135mm 1,275mm Distance Between Center 1,500mm – 12,000mm 1,500mm – 12,000mm 1,500mm – 12,000mm 1,500mm – 12,000mm Spindle Nose A2-11 ~ A2-32 A2-11 ~ A2-32 A2-11 ~ A2-32 A2-11 ~ A2-32 Bed Width 560mm 560mm 560mm 560mm Spindle Bore 6-22” 6-22” 6-22” 6-22” Spindle Motor Standard 20HP, Option 40HP, 50HP Standard 20HP, Option 40HP, 50HP Standard 20HP, Option 40HP, 50HP Standard 20HP, Option 40HP, 50HP Controller FANUC / FAGOR / SIEMENS FANUC / FAGOR / SIEMENS FANUC / FAGOR / SIEMENS FANUC / FAGOR / SIEMENS -
Features
- One piece bed, floor type casting.
- Alloy steel spindle with opposed taper roller bearings.
- All gears in the headstock are hardened and precisely ground.
- Automatic ranges of spindle speed through pneumatic gear shift.
- Spindle speed ranges are automatically changed by M code.
- Infinitely variable speed are commanded by S code.
- Tool change are commanded by T code.
- Auto lubrication system is equipped for headstock, carriage, and cross-slide.
- Precision tapered roller bearings are equipped on the spindle and the quill.
- The quill is heat treated and precisely ground.
- Internal taper of quill to suit MT#6 dead center or live centre.
- Turcite B anti friction material is applied on cross slide and carriage for reduce friction.
- X and Z axis ballscrews are protected by covers to prevent ingress of swarf / chips and coolant.
Standard Accessories
- Hydraulic H4 turret.
- Rotating tailstock quill with 235mm diameter.
- Motorized tailstock body and quill movement.
- FANUC 0i-TF series complete with manual guide and thread repair.
- Front and rear chip conveyor.